Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Fontana
A new driveway gate in Fontana typically costs between $2,800 and $7,500 installed, depending on the gate style, whether you need a motor, and what your HOA requires. Most single swing gates with a basic operator land in the $3,400 to $4,800 range. We quote a written price before anyone touches a tool, and we coordinate with your management company if you live in a tract like Southridge or Bella Fontana. Call (951) 934-7330 and a live person answers, day or night.
If you’re reading this from a 1990s tract home in Coyote Canyon or an older 1950s property near downtown Fontana, you’re probably dealing with a gate that’s reached the end of its life, or a board that just told you the finish has to match exact specs. We handle both. Our crews work Fontana weekly, we know what the architectural review committees expect, and we know what the Santa Ana winds off the Cajon Pass do to a poorly set post.
Why Vance Gate Repair Riverside Is Fontana’s Preferred Gate Installation Company
Most gate companies show up, hang a gate, and leave. We work differently because Fontana demands it. The wind loading here at the base of the Cajon Pass is the harshest in the Inland Empire. A footing that holds fine in Rialto will shear in Fontana during a bad Santa Ana event. We size posts and pour footings for that load, not for the easy afternoon install.
Homeowners in Fontana hire us for a specific reason: we hand you a written price before work starts, and we leave you a photo record of what we did. Under Clause 1 of the Haven Standard, the flat price is in your hand before any tool comes off the truck. Under Clause 4, the photo log of what was found, what was set, and what was installed is yours to keep. No surprise invoice. No verbal estimate that drifts upward.
Adrian Vance founded this company in 2014 out of commercial access-control work, and that discipline carries into every residential install in Fontana. We document limit-switch settings, photograph wiring, and file a record so the next technician never has to guess. When a Fontana HOA board wants to see exactly what was installed and how it was set, we hand them the file.
Our Gate Installation Services in Fontana
We handle the full range of Gate Installation work across Fontana, from a simple pedestrian gate to a heavy commercial slide gate on an industrial lot off Slover Avenue. Here’s what most Fontana customers call us for. If your HOA requires architectural approval before a new gate goes in, we coordinate that documentation on your behalf.
Driveway Gate
Driveway gates are the most common install we do in Fontana’s newer tracts, especially Southridge, Coyote Canyon, and the subdivisions along Duncan Canyon Road. These homes usually have block wall perimeters and a 16 to 20 foot wide driveway opening. A typical tubular steel driveway gate in Fontana runs $3,200 to $5,600 with an operator, depending on gate width and finish. The HOA finish requirements in these tracts are specific; we match the original ornamental iron exactly.
Pedestrian Gate
Pedestrian gates serve the side yards and walk-up entries common to Fontana’s 1950s-era homes near downtown and the former Kaiser Steel corridor. These are often retrofitted wrought iron gates on narrow side yards. A pedestrian gate install in Fontana runs $900 to $2,200 depending on size and whether you want a matching lock set or magnetic latch keyed to your gate operator.
Sliding Gate
Slide gates dominate Fontana’s commercial side, especially along Cherry Avenue, Slover Avenue, and the I-10 corridor warehouse districts. These are heavy cantilever and V-track slide gates where the rack and pinion teeth collect fine truck dust constantly. A commercial slide gate install in Fontana runs $5,500 to $14,000 depending on width (most are 24 to 40 feet), gate weight, and whether the track needs new concrete. We spec sealed bearing rollers and dust-tolerant drive components because Fontana’s industrial air will clog a standard setup in months.
Swing Gate
Swing gates are the default for Fontana residential driveways, whether it’s a double swing gate on a newer tract home in northern Fontana or a single leaf on a 1950s-era driveway near downtown. A single swing gate with operator in Fontana runs $2,800 to $4,800; a double swing gate runs $4,200 to $7,200. The hinge post matters more than the gate leaf here. We bore deeper footings and use heavier wall tube on the hinge side because Santa Ana winds will find a weak post.
Double Gate
Double gates are standard for wider driveways in Fontana’s 1990s and 2000s subdivisions. Two 8-foot leaves with a heavy operator and matching finish run $4,200 to $7,200 in Fontana’s current market. The alignment matters double – if one leaf drifts out of plane because the post shifted, the whole gate binds. We set both posts in the same pour and reinforce the center stop.
Security Gate
Security gates in Fontana aren’t just for industrial lots. Some homeowners near the warehouse corridors on the city’s south side use reinforced steel gates with mag locks and keypads. A security-rated steel gate install starts around $5,000 and goes up with access control and camera tie-ins. We handle the full access control side too, since that’s where our company’s technical foundation sits.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Fontana
The brand on your gate motor matters less than whether the installer actually understands it. We work on nine major automation brands including BFT, Linear, and Viking, plus Ghost Controls for residential retrofits, so we’re not trying to sell you a replacement motor just because your existing one isn’t in our comfort zone. If your 2003 Linear operator on a Southridge double gate is still running, we’ll build the new gate around it. If you want a new operator, we stock common parts for Fontana jobs in our Inland Empire service area and can usually have a motor, control board, and photocell pair ready the same week.
Common Gate Installation Problems We See in Fontana Homes
Fontana is not a generic install market. Here’s what we see repeatedly:
- HOA finish rejection: Boards in Coyote Canyon and Bella Fontana reject new gates when the finish or height doesn’t match the community’s architectural standard. We’ve done enough installs in these tracts that we know what the boards expect before we order steel.
- Santa Ana post shear: Gates installed with standard 4×4 posts and shallow footings fail at the hinge post during fall wind events. We bore deeper and use heavier wall tube specifically for Fontana’s wind profile.
- Commercial dust seizure: Slide gates on Cherry Avenue and Slover Avenue clog with truck dust inside the rack teeth and roller channels. A standard install without sealed bearings and dust-tolerant components seizes within months.
- Narrow driveway clearance: Older Fontana homes near downtown have narrow driveways where a gate leaf hung too close to the fence line scrapes the stucco or the car mirror. We account for the actual swing radius and set-back before we hang anything.
Pricing for Gate Installation in Fontana, CA
Here’s the honest picture for Fontana’s market in 2026. The numbers below are for a full install including labor, steel, hardware, and a basic operator where noted. Each job is quoted in writing before work starts, so these ranges set the expectation but your flat price is exact and handed to you before we begin.
- Single swing driveway gate (no operator): $1,900 to $3,200
- Single swing gate with operator: $2,800 to $4,800
- Double swing gate with operator: $4,200 to $7,200
- Pedestrian gate: $900 to $2,200
- Commercial slide gate (24-40 ft): $5,500 to $14,000
- Security gate with access control: $5,000 to $11,000+
What moves the number in Fontana: gate width, whether the HOA requires a specific finish (powder coat costs more than painted), whether the existing post footings can be reused, and whether you have an operator already. Estimates are free, the written price is exact, and the quote is agreed before any work starts. Call (951) 934-7330 to schedule a measure.
We Also Serve Cities Near Fontana
Our Fontana crews also cover Bloomington, Rialto, Mira Loma, and Riverside. If you’re just across the city line on the Rialto side of Foothill Boulevard or in a Bloomington industrial lot off Slover, the same written-price standard applies. Call (951) 934-7330 and we’ll tell you straight how soon we can be there.
Serving Fontana, CA - Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Fontana
Yes, in nearly all of Fontana’s master-planned communities including Bella Fontana, Southridge, and Coyote Canyon, you need architectural committee approval before a new gate goes in. The board typically reviews gate style, height, finish color, and whether the operator meets noise or safety standards. We prepare the documentation package and coordinate with your management company so the install passes the first inspection. Call (951) 934-7330 if you need help pulling together the approval paperwork.
We pour gate post footings 36 to 42 inches deep in Fontana with a larger diameter than standard, specifically because the wind loading at the base of the Cajon Pass exceeds what a 24-inch standard footing will hold. The hinge post gets the deepest bore and a heavier wall tube, and for double gates we tie both posts into the same pour. A generic install with shallow footings is the single most common reason Fontana gates fail in the fall.
The fine particulate dust from constant truck traffic on Cherry Avenue packs into the rack teeth, roller channels, and motor housing, so the same slide gate that runs clean for years in Rancho Cucamonga seizes in Fontana within months. We spec sealed bearing rollers, dust-tolerant drive components, and a maintenance schedule calibrated to Fontana’s air, not a coastal or cleaner-air suburb’s. If your slide gate is binding or tripping its limit switches, call (951) 934-7330.
Yes, if the gate itself is structurally sound, we install a new operator on the existing gate rather than replacing the leaf. We check the hinge posts, confirm the gate swings true, then mount a new operator that matches what your HOA already approved. This is often a $1,200 to $2,400 job in Fontana versus $4,000+ for a full replacement. Call (951) 934-7330 and we’ll assess the gate and quote it in writing.
Older Fontana homes near the historic downtown corridor have narrow driveways, often 10 to 12 feet wide, with the fence line close to the house and stucco walls right at the swing zone. That changes the gate leaf width, the swing radius, and the setback from the property line. We measure the actual throw radius before ordering steel, and we’ll re-hang the gate so the leaf clears your car mirrors and the stucco. A single leaf on a narrow Fontana driveway typically runs $2,200 to $3,800 with an operator.
Written by Adrian Vance, Owner at Vance Gate Repair Riverside. Serving Fontana gate installation and repair with written pricing and photo documentation on every job.