Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Repair in Pedley, CA
Gate access control in Pedley means retrofitting keypads, intercoms, and card readers onto heavy ranch gates built for horse trailers, not sedans. Most properties here sit on oversized lots with decomposed-granite driveways, and the gates themselves are usually steel or iron, sized for a Ford F-250 pulling a two-horse trailer. That changes what we stock, how we wire, and what we charge. Call (951) 934-7330 and we’ll give you a written price before any work starts.
Why Pedley Homes Are Different
Pedley is semi-rural Riverside County, unincorporated, with horse properties and ranchettes instead of tract housing. A standard suburban gate call here is a 12-foot ornamental swing gate on a concrete pad. A Pedley call is more often a 16-foot agricultural slide gate on a DG driveway that has been migrating into the track for the last six months. Permits run through Riverside County’s unincorporated process, not a city building department, and motorized gate work can trigger county inspection requirements that don’t apply in Jurupa Valley or Riverside proper. Summers push past 105°F, which bakes motor housings and control boards, and Santa Ana winds put real lateral load on wide gates across open lots. The hinges, latches, and rollers all wear differently here than they do ten minutes down the road.
Our Main Pedley Services
Most calls we take in Pedley fall into three buckets. Here’s what each one involves locally.
Gate Repair in Pedley
Repair calls in Pedley run heavy on agricultural slide gates with track problems. DG and gravel from unpaved driveways gets kicked into the rail, the rollers grind, and the operator burns out trying to move a gate that’s dragging. Before we diagnose a motor or board on an equestrian property here, we clear the track and check the rollers, because that’s the actual cause more often than not. Same-day service is the norm on repair calls, and the written price comes first. Gate Repair in Pedley covers hinges, latches, track cleanup, roller swaps, and full rebuilds.
Gate Installation in Pedley
Installation here usually means sizing a gate wide enough for horse trailers and setting posts in soil that shifts with the seasons. A 14-foot swing gate on a suburban lot and a 16-foot slide gate on a ranchette have almost nothing in common. We measure the driveway width, confirm the county permit path if the gate will be motorized, and quote a written price that includes the gate, hardware, operator, and safety edges. Free measure, written quote, no surprises. Gate Installation in Pedley walks through the full scope.
Gate Motor & Opener in Pedley
Pedley’s heat and dust are hard on gate motors. Santa Ana winds add a load most residential operators aren’t rated for on wide ranch gates, and the dust from unpaved driveways gets into limit switches and gearboxes. We service nine automation brands, so if the motor on the gate is a LiftMaster, FAAC, or Mighty Mule, we repair it rather than pushing a replacement. If replacement is genuinely the right call, the written price covers the motor, the brackets, and the wiring. Gate Motor & Opener in Pedley has the full breakdown.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterGate Access Control in Pedley


Pedley’s older ranch-style homes, many built in the mid-20th century and since expanded, rarely had any access control beyond a padlock. Today’s owners want keypad or phone entry on gates that were never wired for it, and the decomposed-granite driveways and wide agricultural gate spanning make retrofits more involved than on a suburban single-swing. The most common request we hear: a keypad for the farrier and vet, plus a remote for the truck. That’s the job we know best. Our hub page on Gate Access Control covers the full range; below is what changes in Pedley.
Keypad Entry
Signs you need it
You’re handing out physical keys or remotes to more than three people and can’t revoke one without taking back a device.
What it costs in Pedley
A wired keypad retrofit on an existing Pedley gate operator typically runs $350-$800 installed, depending on whether the wire run crosses a DG driveway.
How we do it
We mount the keypad at trailer-window height, run conduit beneath the driveway or along the fence line, wire it into the operator’s open command, and photograph every connection before we leave.
Video Intercom
Signs you need it
Your gate is far enough from the house that you can’t see or hear who’s at the driveway.
What it costs in Pedley
A two-station video intercom retrofit at a Pedley ranchette runs $1,000-$2,200 installed, the range driven by Wi-Fi reach from the gate to the house.
How we do it
We set the gate station on a steel post near the keypad, run the data line or configure the point-to-point wireless bridge, pair the interior monitor, and walk you through answering from the house.
What Gate Access Control Costs in Pedley
| Item | Typical range in Pedley |
|---|---|
| Keypad entry retrofit | $350 - $800 |
| Remote control upgrade | $150 - $400 |
| Video intercom system | $1,000 - $2,200 |
| Phone entry / cellular controller | $650 - $1,200 |
Can you put a keypad on a gate that was never motorized?
Yes. We add an operator sized for the gate’s width and weight, then wire the keypad into it. Pedley’s wide ranch gates usually need a heavier slide operator than a suburban swing, and the written price covers both the operator and the keypad before work starts. Call (951) 934-7330 for a free written estimate.
Does my phone work as a gate opener in Pedley?
Yes, with a cellular or network-connected controller wired into the gate operator. You grant access by phone to the farrier, vet, or a neighbor, and you can revoke it the same way. Installed prices in Pedley generally run $650 to $1,200 depending on the existing operator.
Gate Parts & Welding in Pedley


On Pedley’s equestrian properties, the parts that fail first are the ones that touch the ground: rollers, track, lower hinges. Decomposed-granite driveways migrate into slide tracks constantly, grinding rollers down and jamming operators. When a steel gate sags or a post heaves, welding and metalwork become the fix, not a replaced hinge. We field-weld and we fabricate, and we leave a photographed record of every weld and every part number installed. Our hub page on Gate Parts & Welding covers the scope; here’s what Pedley calls us for.
Gate Rollers
Signs you need it
The gate jerks, shudders, or stalls halfway along the rail, and you can hear grinding from the track area.
What it costs in Pedley
Roller replacement runs $180-$350 including the parts and clearing the DG from the track before the new rollers go in.
How we do it
We lift the gate off the rail, clear the track of decomposed granite and debris, inspect the rail for wear, and install new rollers sized to the gate’s weight.
Hinge Replacement
Signs you need it
The gate sags at the latch side, scrapes the ground, or swings too freely because the hinge pins have worn oblong.
What it costs in Pedley
Hinge replacement on a heavy Pedley ranch gate usually runs $250-$450 per hinge, including cutting off the old one and welding the new one in place.
How we do it
We support the gate with a jack, cut the old hinge off, weld a new heavy-gauge hinge at the correct pitch, and photograph the finished weld and alignment.
What Gate Parts & Welding Costs in Pedley
| Item | Typical range in Pedley |
|---|---|
| Gate roller replacement | $180 - $350 |
| Hinge replacement (per hinge) | $250 - $450 |
| Post replacement | $400 - $900 |
| Custom welding / fabrication | $150 - $600 |
Can you weld a gate without taking it down?
Yes. For cracks in the frame or hinge mounts, we field-weld in place with the gate supported and level. If the gate is too far gone or the post is rotted, we quote a removal and replacement separately. Every weld leaves a photographed record before we leave the job.
How much does a new gate post cost in Pedley?
A steel post replacement on a Pedley ranchette typically runs $400-$900, which includes cutting out the old post, setting a new one in concrete, and re-hanging the gate. If the old post is concreted deep or the gate is oversized, the written quote reflects that before we start. Call (951) 934-7330 for an exact number.
Brands We Service in Pedley
We work on whatever motor is already on your gate. That includes Ghost Controls, DoorKing, Elite, and Mighty Mule, plus five other major automation brands. Common control boards, remotes, and photo-eyes are stocked for same-week turnaround on most Pedley calls. See our brands for the full list.
Pricing for Gate Repair in Pedley, CA

| Service | Typical range in Pedley |
|---|---|
| Keypad entry retrofit | $350 - $800 |
| Remote control upgrade | $150 - $400 |
| Video intercom system | $1,000 - $2,200 |
| Phone entry / cellular controller | $650 - $1,200 |
| Gate roller replacement | $180 - $350 |
| Hinge replacement (per hinge) | $250 - $450 |
| Post replacement | $400 - $900 |
| Custom welding / fabrication | $150 - $600 |
What pushes a Pedley quote up: gate width and weight (horse-trailer gates need heavier operators and bigger hinge posts), unpaved driveway material migrating into slide tracks, and county permit requirements on motorized retrofits. The written price we hand you before work starts is the price you pay. No surprise invoice at the end.
Neighborhoods We Serve in Pedley
We cover all of Pedley’s ranchettes and residential pockets, from the horse properties along the Santa Ana River corridor to the subdivisions off Limonite and the older ranch homes west of the 15. Response time is typically same-day for emergency repairs and next business day for quoted work.
- Pedley Hills ranchettes
- Limonite corridor
- Santa Ana River equestrian area
- West Pedley ranch lots
- North Pedley acreages
Service Area - Cities Near Pedley

We also serve the surrounding Inland Empire communities, including Riverside, CA, Rubidoux, CA, El Sobrante, CA, and Sunnyslope, CA. Dispatch is coordinated from our Inland Empire office, with crews serving Pedley locally.
Serving Pedley, CA - Our Local Coverage Area
We’re based in the Pedley area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Pedley

Pedley is unincorporated Riverside County, so motorized gate work can require county permits and inspection, not a city building department sign-off. We handle the permit paperwork and coordinate inspections on every motorized job. The written quote reflects any permit fees before work begins.
Most Pedley repair calls get same-day service, especially if a gate is stuck open and livestock or horses are inside the property. A live person answers our phone 24 hours a day. Call (951) 934-7330 and we’ll dispatch a technician with a name and photo sent to your phone before arrival.
Yes, every job. Under our Haven Standard Clause 1, you get a written price handed to you before any tool is picked up. That price is the price you pay, and if the repair isn’t right, our 365-Day Done Right Promise means we make it right at no additional charge.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pedley Customers Say
"The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N.





Before
After
Before
After